3.2.1.5. Crankshaft pulley
See subsection 3.1.1.5.
If the pulley does not give in to removal because of dense landing on a crankshaft sock, then it is possible to use a stripper. For fastening of a stripper carving openings are provided in a pulley.
- 1. Maintenance instruction
- 2. Maintenance
- 3. Engines
- 3.1. 1,4 and 1,6 liters petrol engine
- 3.2. 2,0 liters petrol engine
- 3.2.1. Types of repair of the engine without dismantle from the car
- 3.2.1.1. Specifications
- 3.2.1.2. Check of a compression in engine cylinders
- 3.2.1.3. Order of installation of the piston of the 1st cylinder in compression step VMT
- 3.2.1.4. Cover of a head of the block of cylinders
- 3.2.1.5. Crankshaft pulley
- 3.2.1.6. Cover of the chain drive of cam-shafts
- 3.2.1.7. Chain of the drive of cam-shafts
- 3.2.1.8. Natyazhitel of a chain, uspokoitel and asterisks of the drive
- 3.2.1.9. Cam-shafts
- 3.2.1.10. Levers of the drive of valves and hydraulic regulators
- 3.2.1.11. Head of cylinders
- 3.2.1.12. Oil pallet
- 3.2.1.13. Oil pump
- 3.2.1.14. Oil cooler
- 3.2.1.15. Crankshaft epiploons
- 3.2.1.16. Flywheel (or drive plate of the hydrotransformer)
- 3.2.1.17. Details of a suspension bracket of the power unit
- 3.2.2. Dismantle and capital repairs of the engine
- 3.2.1. Types of repair of the engine without dismantle from the car
- 3.3. Diesel engine
- 4. Cooling system
- 5. System of heating and ventilation
- 6. Fuel and exhaust system
- 7. System of launch of the engine
- 8. Coupling
- 9. Transmissions
- 10. Half shafts
- 11. Brakes
- 12. Suspension brackets and steering
- 13. Body
- 14. Electric equipment
See subsection 3.1.1.5.
If the pulley does not give in to removal because of dense landing on a crankshaft sock, then it is possible to use a stripper. For fastening of a stripper carving openings are provided in a pulley.