6.3.2.11.5. Air stream sensor
The sensor of a stream of air is installed on the right side of the case of a butterfly valve.
Before its removal, disconnect a wire of the negative plug of the accumulator.
Removal and installation
- 1. Maintenance instruction
- 2. Maintenance
- 3. Engines
- 4. Cooling system
- 5. System of heating and ventilation
- 6. Fuel and exhaust system
- 6.1. Carburetor engines
- 6.2. Engines with system of injection of fuel
- 6.3. System of food / production of the fulfilled gases
- 6.3.1. Models with single-point electronic injection of fuel
- 6.3.2. Models with multipoint electronic injection of fuel
- 6.3.2.1. Technical characteristics
- 6.3.2.2. Air filter
- 6.3.2.3. Accelerator rope
- 6.3.2.4. Accelerator pedal
- 6.3.2.5. System of injection of fuel
- 6.3.2.6. Fuel system
- 6.3.2.7. Fuel pump
- 6.3.2.8. Fuel level sensor
- 6.3.2.9. Fuel tank
- 6.3.2.10. Case of a butterfly valve
- 6.3.2.11. Elements of system of injection of fuel (1,6 l engines)
- 6.3.2.11.1. Fuel collector and fuel injectors
- 6.3.2.11.2. Fuel pressure regulator
- 6.3.2.11.3. Potentiometer of a butterfly valve
- 6.3.2.11.4. Additional valve of air supply
- 6.3.2.11.5. Air stream sensor
- 6.3.2.11.6. Electromagnetic valve of bystry operation of the engine
- 6.3.2.11.7. The temperature valve of the accelerated warming up of the engine
- 6.3.2.11.8. Sensor of an angle of rotation of a bent shaft and transistor of power
- 6.3.2.11.9. Sensor of temperature of cooling liquid
- 6.3.2.11.10. Engine electronic control unit
- 6.3.2.11.11. Switch of neutral transfer
- 6.3.2.11.12. Switch of blocking of starters / lamps of a backing
- 6.3.2.11.13. Relay of an electronic control unit of the engine and fuel pump
- 6.3.2.11.14. The switch in system of strengthening of steering
- 6.3.2.11.15. The switch in the air conditioning system
- 6.3.2.11.16. Sensor of speed of the movement of the car
- 6.3.2.12. Elements of system of injection of fuel (2,0 l engines)
- 6.3.2.13. Inlet collector
- 6.4. System of decrease in toxicity of the fulfilled gases
- 7. System of launch of the engine
- 8. Coupling
- 9. Transmissions
- 10. Half shafts
- 11. Brakes
- 12. Suspension brackets and steering
- 13. Body
- 14. Electric equipment
The sensor of a stream of air is installed on the right side of the case of a butterfly valve.
Before its removal, disconnect a wire of the negative plug of the accumulator.
Removal and installation